Categories: The Rules

No Frame Mounted Pumps-Rule #30

Either CO2 cannisters or mini-pumps should be carried in jersey pockets (See Rule #31). The only exception to this rule is to mount a Silca brand frame pump in the rear triangle of the frame, with the rear wheel skewer as the pump mount nob, as demonstrated by members of the 7-Eleven and Ariostea pro cycling teams. As such, a frame pump mounted upside-down and along the left (skewer lever side) seat stay is both old skool and euro and thus acceptable. We restate at this time that said pump may under no circumstances be a Zefal and must be made by Silca. Said Silca pump must be fitted with a Campagnolo head. It is acceptable to gaffer-tape a mini-pump to your frame when no CO2 canisters are available and your pockets are full of spare kit and energy gels. However, the rider should expect to be stopped and questioned and may be required to empty pockets to prove there is no room in them for the pump.

This Rule must have been one of the original Rules to come down from the summit of Mt Velomis, it’s that old. If you want to still use a frame pump you are going to have to find a Silca pump and a Campagnolo pump head, both of which are on the shelf next to the leather Cinelli hair-net helmets in lower Serbia. Or grow a giant ‘stache, infiltrate the retro Strade Bianchi fondo and nick one off any 1970’s bikes there. Or go on eBay and easily find either item.

The italian company Silca has recently “left the building”. They were renown for their trusty floor pump and slightly less trusty frame pumps. The floor pump is indestructible; mine still hangs out in the dark corner of my shop, ready. It’s always ready. The frame pumps were less indestructible but then again, we were asking them to come on every ride with us, hanging on only by its own spring tension. Between crashes, potholes, and repulsing dogs, this frame pumps took some hits.

Silca has been reborn in the USA and their floor pump has been also been reborn hard as the most beautiful floor pump ever. The Silca name seems to be in very good hands. However, I’m not expecting to see a reissue of the frame pump anytime soon but I’m usually wrong. The mini-pump and these new fangled CO2 canisters may have truly sealed its fate.

Why would a Rule be so specific about its exceptions? Did Lord Merckx favor the Silca frame pump with a campy steel pump head? It’s a question of faith, isn’t it? A pump jammed in the rear triangle of the bike did look very studly, not unlike a Beretta casually stuffed betwixt pants and underwear, in the back, no holster. It’s a little crazy but very functional.

As The Rules go, I’ve been known to “interfere” with myself on this one (god love the Irish for that expression). But this is still preferable to using gaffer tape. Gaffer tape? Something must have been lost in translation between the ancient Flemish and today. Gaffer’s tape was only acceptable anywhere if your first name was Sean and last name was Kelly and you were such a Hardman that anything other than toe clips was a worse sin than interfering with one’s self.

Gianni

Gianni has left the building.

View Comments

  • I will never mount a pump on any frame I ride. End of.

    In contrast to your praise of the Silca, the Lezyne floor pump which I paid for in full has been a major disappointment. It Looks Fantastic in every way but performs like Challenger. Bad O rings.

  • @Harminator

    For $450 US you could get a new Silca which better not have o-ring issues. This struck me as a crazy price for a floor pump but really it's maybe two years worth of tub tires. Also, over its lifespan, a worthy investment, and half the money one might spend for one trip to dentist for tooth repair in US, FFS.

    I also have a lezyne floor pump which, once I figured out how to operate the chuck, works like a bastard (in a good way).

    On  a completely unrelated note. If anyone needs a laugh, please reread the Hinault-Fignon cartoon at this link.

  • @Gianni

    I will never pay $450 for any floor pump. End of.

    Word.

    Bernard would never clone nine CsOTHO. Merckx forbid the thought.

  • I do have one of these that still works well enough -- leather plunger and all.

    Though planning to make the new SILCA part of our service course this coming year.

  • @Harminator

    @Gianni

    I will never pay $450 for any floor pump. End of.

    Word.

    Bernard would never clone nine CsOTHO. Merckx forbid the thought.

    Why pay more than $750 for 32h wheels ? Period.

  • @Harminator only issue I've had with my Lezyne floor pump is with tubes that have removable valves, it ends up unscrewing the valve from the stem when I go to unscrew the chuck!

  • I will stick with a frame mounted pump.  Just under the top tube where TK put the pump peg.  CO2 canisters just don't cut it for me.  I just need to locate an appropriately sized Silca pump that can be painted to match the frame (in the interim a very serviceable Topeak pump will fit the bill).  Call me a heretic...

  • I was wondering what this little braze-on is for, that the Prophet put on his bike?

1 2 3 7
Share
Published by
Gianni

Recent Posts

Anatomy of a Photo: Sock & Shoe Game

I know as well as any of you that I've been checked out lately, kind…

6 years ago

Velominati Super Prestige: Men’s World Championship Road Race 2017

Peter Sagan has undergone quite the transformation over the years; starting as a brash and…

7 years ago

Velominati Super Prestige: Women’s World Championship Road Race 2017

The Women's road race has to be my favorite one-day road race after Paris-Roubaix and…

7 years ago

Velominati Super Prestige: Vuelta a España 2017

Holy fuckballs. I've never been this late ever on a VSP. I mean, I've missed…

7 years ago

Velominati Super Prestige: Clasica Ciclista San Sebastian 2017

This week we are currently in is the most boring week of the year. After…

7 years ago

Route Finding

I have memories of my life before Cycling, but as the years wear slowly on…

7 years ago