Categories: Reverence

Reverence: Campagnolo Quick-Release

Tullio Campagnolo, an amateur racing cyclist, was racing on a classic Rule #9 day in Italy. The weather was cold, and I believe he was racing in the mountains. Riding with the leaders, I can almost feel in the pit of my stomach the dread that must have crept over him as he realized he wouldn’t be able to change gear. At the time, wheels used a flip gear to allow for changing of gear, and were fixed in place with wing-nuts which made it easy to remove the rear wheel – assuming everything was well greased, nothing was dirty or frozen, and the rider had just taken a refreshing shower. Which happened to not be the case on this particular day, as he had the misfortune of actually riding his bike.

It almost goes without saying that his frozen fingers were unable to loosen the frozen wing-nuts. And here is where Tullio distinguishes himself from people like me; whereas I would have chucked a Millarcopter you could see from the International Space Station, Tullio made the slightly more productive move of inventing perhaps the most sensible component on our bicycles: the quick-release.

There is no component a Velominatus can own that speaks more clearly to the history of our sport than a Campagnlogo Quick-Release. Bearing that in mind, it’s a shameful thing that I, a self-proclaimed Velominatus, have never owned one. Until a few months ago, that is, shortly after procuring my Record hubs, when I finally got my hands on a set.

And I have to say, they don’t disappoint. They’re not the lightest skewers in existence, but they do have a beautifully solid feeling when opening and closing them, and they grip amazingly true to the Campagnolo dropouts on my steel frame. The arc of the lever defies description; on the front it hugs the fork and tucks neatly behind it while on the back it bisects the angle of the chain and seat stays in perfect Rule #41 compliance. It is a sight to behold. In fact, it’s a little bit dangerous because I should spend less time staring at them when I’m riding and more time starting at the road.

Grazie, Signore Campagnolo.

frank

The founder of Velominati and curator of The Rules, Frank was born in the Dutch colonies of Minnesota. His boundless physical talents are carefully canceled out by his equally boundless enthusiasm for drinking. Coffee, beer, wine, if it’s in a container, he will enjoy it, a lot of it. He currently lives in Seattle. He loves riding in the rain and scheduling visits with the Man with the Hammer just to be reminded of the privilege it is to feel completely depleted. He holds down a technology job the description of which no-one really understands and his interests outside of Cycling and drinking are Cycling and drinking. As devoted aesthete, the only thing more important to him than riding a bike well is looking good doing it. Frank is co-author along with the other Keepers of the Cog of the popular book, The Rules, The Way of the Cycling Disciple and also writes a monthly column for the magazine, Cyclist. He is also currently working on the first follow-up to The Rules, tentatively entitled The Hardmen. Email him directly at rouleur@velominati.com.

View Comments

  • Oh also. The rear derailer got those strange black plastic bits around the adjusting screws.

  • I'm in disagreement with the front QR angle IMO it goes upward just fore of the fork. You can post all the photos you want you aren't going to change my mind.

  • @michael
    Nope, wrong. Your way is fine if you like, but aft of the fork is the true way. It's easier for the race mechanics for a start.

    And you won't take a picture as proof? Even one of Eddy Merckx?

  • Woah, Brett! What model/#/year are those levers with the cut-out on your Bosworth?

    Those are beautiful!

  • @michael
    Haha, touche! But I'd suggest the Merckx might finish a race with his q/r in that ugly and ungainly position, but I bet he never started one. Most likely that was a replacement wheel fitted in a hurry, probably by some part-time neutral service guy...

  • @Jim

    Was it 1978? A regulation (USA?) went into place. The quick release arm was bent. The quick release nut added a roundish tip. The brake caliper release lever took on a spoon shape. The front rerailer added a spoon shape to the leading edge. The brake pad holders got a plastic coating on the down bit. All in the name of safety.

    Jim, very cool background - I had not heard those reasons for the changes. Thanks for sharing. You forgot to add about the lawyer tabs on the forks. Which I file off every fork that crosses the threshold into my workshop.

Share
Published by
frank

Recent Posts

Anatomy of a Photo: Sock & Shoe Game

I know as well as any of you that I've been checked out lately, kind…

6 years ago

Velominati Super Prestige: Men’s World Championship Road Race 2017

Peter Sagan has undergone quite the transformation over the years; starting as a brash and…

7 years ago

Velominati Super Prestige: Women’s World Championship Road Race 2017

The Women's road race has to be my favorite one-day road race after Paris-Roubaix and…

7 years ago

Velominati Super Prestige: Vuelta a España 2017

Holy fuckballs. I've never been this late ever on a VSP. I mean, I've missed…

7 years ago

Velominati Super Prestige: Clasica Ciclista San Sebastian 2017

This week we are currently in is the most boring week of the year. After…

7 years ago

Route Finding

I have memories of my life before Cycling, but as the years wear slowly on…

7 years ago